FRED ANDERON DRILLING, NC.
10760 S Grass Valley Road, Winnemucca, NV 89445

 Phone 775 623 4203
Email fred@fadrilling.com
Fax 775 623 4225

License Number 021467
Insured and Bonded


HomePipe TrippingWell AbandonmentSimple PumpDomestic WellsJobs
Well RepairPreventive MaintenanceWater TestingAgriculture WellsWindmill and SolarWater Well Maintenance Program

The Simple Pump™ Hand-Operated Water Pump
As a backup right beside your existing submersible. Or use as your primary pump.

GIVE'S YOU FULL USE OF ALL YOUR HOME'S TAPS AND PLUMBING FIXTURE
With Simple Pump, you can easily pump into a pressurized plumbing system -- or uphill -- or up to a gravity-feed tank -- or into a pressurized irrigation system! 
NO OTHER HAND PUMP CAN GIVE YOU THIS CAPABILITY!
With other hand pumps, you are delivering water to a bucket, or to a trough or outside tank at ground level.



AFFORDABLE
Simple Pump is the most capable hand pump (retain use of your home's plumbing system, pump from 350 feet water level, and more)
It is the best made -- the only hand-pump made with computer controlled machining from aerospace grade lead-free stainless steel and aluminum. (All metal parts in contact with water are steel.)


PUMPING DEPTH
Standard 24-inch handle
When pumping manually, the unique lever arm pump only takes 12 lbs. of force to pump 5 gallons per minute from 100 feet.
Go Deeper with the optional 36-inch handle
The 36" handle cuts the required pumping force in half! So easy to use, a child can pump up to 5 gallons per minute. This decreased effort also means you can pump more easily from further down - from as deep as 350 feet water level! 


FREEZE-PROOF
The Simple Pump is freeze-proof with a 1/16" weep hole drilled at 48 inches from the top fitting. Water bleeds back down below the frost line when the pump is not in use. This still allows the pump to hold prime for months.

RELIABLE
Simple Pump is more affordable than comparable pumps. But the cost-savings goes beyond the initial set up.
So durable, it has a 50-year lifespan. Aircraft-grade, solid billets of metal are computer machined for maximum precision --- much stronger than casting. And because the parts fit together so precisely, wear is greatly reduced. Graphite-impregnated bronze bushings at the three pump-head pivot points further increase durability. Routine maintenance consists of replacing the seals in the pump cylinder and pump head. Replacement times found by most clients range between 3 and 10+ years, at a cost of only $25. 


SECURE
If you are away from your property, for stretches of time, you can remove the pump lever and lower the pump head, leaving your pump inconspicuous and protected (as shown to the right).


The Simple Pump™ Hand-Operated Water Pump
Contact Us